词语:余量,语音朗读:热度:790

词语余量拆分为汉字:

余字的拼音、笔画、偏旁部首、笔顺、繁体字,余字字源来历,余字演变

我:“~将老”。剩下来的,多出来的:剩~。~粮。~兴。~悸。~孽。节~。~生。~荫(指前人的遗泽,遗留的庇荫)。~勇可贾(gǔ)(还有剩余的力量可以使出来)。十、百、千等整数或名数后的零数:十~人。后:“劳动之~,欢歌笑语。”农历四月的别称……

量字的拼音、笔画、偏旁部首、笔顺、繁体字,量字字源来历,量字演变

1. 量 [liáng]2. 量 [liàng]量 [liáng]确定、计测东西的多少、长短、高低、深浅、远近等的器具:~具。~杯。~筒。~角器。用计测器具或其他作为标准的东西确定、计测:计~。测~。~度。~体温。估计,揣测:估~。思~。打……

 

查询词语:余量

汉语拼音:yú liàng

 

词语余量基本解释

1.一部机器的配套部件(如轴与轴承)之间的容许的公差。

2.在瞄准冰上溜石游戏中的石头时把它的偏离直线路经考虑在内的余量。

 

词语余量双语例句

双语例句
  1. These structures look even shakier when the collateral cushion is, as is often the case, risky bonds - not cash.

    这些结构看,甚至步当抵押品余量,因为通常情况下,高风险债券,而不是现金。

  2. The flight crew has its own independent emergency oxygen system, and this dial shows how much oxygen is left in that system.

    机组人员有自己独立的应急氧气系统,那个刻度表显示该系统中氧气的余量。

  3. The system can be adopted to facilitate the inquiry , Statistical data , and Automatic Processing and calculation of inventory cushion.

    可以通过本系统方便的查询、统计相关的数据,并自动的进行处理和计算库存余量。

  4. Inner- tailpipe nozzle, which cast by investment casting with superalloy K487, is one of the key components of the spaceflight engine.

    内涵尾喷管是某航天发动机的关键部件,采用可焊接铸造高温合金K487无余量整体精密铸造而成。

  5. Since casing strength performance can be influenced by many factors, it is hard to confirm casing strength margin and its value.

    套管强度性能受多种因素的影响,如何确定套管强度余量及其大小,是一个难题。

  6. This technology is employed predominantly for workpieces with relatively large allowances (up to 5 mm).

    所以此种工艺主要用于带有相对较大加工余量(至5mm)的工件。

  7. In this paper, the recent development and its application of the weighted residual method in plastic theory was simply generalized.

    对加权余量法在塑性理论中的近期发展及应用作以简单的综述,并指出了今后进一步的研究课题。

  8. Casting to be rough machined on the cope side to a flat surface leaving ample stock for finishing.

    铸件的上模面将被粗加工成一个平面,并且留有足够的余量以便进行精加工。

  9. Backup allowance of bolts and nuts are at least 5% of its total.

    螺栓螺母至少准备5%的备用余量。

词语余量百科解释:

余量

余量 同 裕量 yú liàng 简单地说,就是多出来一部分,就称之为余量。 1. 一部机器的配套部件(如轴与轴承)之间的容许的公差。 2.在瞄准冰上溜石游戏中的石头时把它的偏离直线路经考虑在内的余量。如:用留出余量的办法和由它的轻跳所估出它的重量来…进行投射。 3,在钢板粗加工中,会对需要精加工的钢板零件放大尺寸,以留出下一步粗加工的余量。

 
辞洋 - 辞海网络版字典