词语：焊枪，语音朗读：热度：305

词语焊枪拆分为汉字：

焊

焊字的拼音、笔画、偏旁部首、笔顺、繁体字，焊字字源来历，焊字演变

用熔化金属或塑料来粘合、修补金属或塑料器物：～接。～工。～料。～条。～枪。……

枪

枪字的拼音、笔画、偏旁部首、笔顺、繁体字，枪字字源来历，枪字演变

刺击用的长矛：长～。标～。红缨～。发射子弹的武器：手～。步～。机关～。～杀。～林弹雨。像枪的东西：焊～。烟～。两头尖的竹木片，供编篱笆用。……

 

查询词语：焊枪

汉语拼音：hàn qiāng

 

词语焊枪基本解释

气焊用的带活门的工具，形状略像枪，前端有喷嘴。也叫焊炬。

 

词语焊枪详细解释

  1. 气焊用的带活门的工具。形状略像枪，前端有喷嘴。

  2. 用其他热源焊接金属时，直接发生焊接热能的工具。

 

词语焊枪双语例句

双语例句

  1. Welding torch welding torch, also known as, the role is to combustible gases mixed with oxygen to form a certain flame welding energy.

    手轮焊炬又名焊枪，作用是将可燃气体与氧气混合，形成具有一定能量的焊接火焰。

  2. A schematic sketch of a welding torch and its gas supply is shown in Figure 6. 2.

    一个焊枪和乙炔气和氧气供应示意图示意图见图6.

  3. The motion of the transport car can drive a welding gun of the welding machine to align a shearing port to carry out welding.

    输送车的移动可使焊接机的焊枪口对准剪切口进行焊接。

  4. When left unattended, torches should be isolated by closing the gas cylinder valves, removing the valve keys and depressurizing the hoses .

    当无人在场看管时，应关闭气体钢瓶阀门，取掉阀门扳手，由此将焊枪隔离并将软管卸压。

  5. As indicated above, through the operation of gun switch, can be self-locking.

    如上所示，通过操作焊枪开关，可以自锁。

  6. It has been found that the gun was fine in the experiment and the welding piece achieved the request of technology.

    经过实践证明，焊枪在实验过程中使用正常，焊件达到了工艺的要求。

  7. Welding torch control system and welding fixture control system design theory were covered by the thesis.

    整个焊枪控制系统设计是在松下多轴机器人控制平台下编制而成；

  8. Use a hole punch, not a torch nor a drill, and punch a hole in the enclosure for the size conduit being used.

    采用打孔机，不要使用焊枪或电钻，在外壳上打出符合导管直径大小的孔。

  9. Juno suppressed an urge to take the welding tool and ram an other hole through the droid's perforated chest.

    朱诺强忍着才没有拿起焊枪在机器人的胸口再烧一个洞。

双语短语

  1. 电子热风焊枪

    ELECTRONIC HOT AIR WELDING GUN

  2. 大阪式焊枪配件

    Parts of Osaka welding Gun

  3. 胀接式点焊枪

    expansion gun

  4. 焊割两用炬。焊割两用气焊枪

    welding and cutting torch

  5. 旋转焊枪焊接机的研制

    Development of welding machine with rotating welding gun

  6. 奥菲达焊枪技术有限公司。

    ALL FID TORCH AND TECHNOLOGY CO., LTD.

  7. 成都恒泰焊枪制造有限公司。

    Chengdu Hengtai Welding Torch Manufacturing Co., Ltd.

  8. 焊缝位姿及焊枪位姿的模型

    MODELS OF WELD POSE AND WELDING GUN POSE

  9. 焊枪、地线与电源整机一体化。

    Integrated welding gun, grounding wire and power supply.

  10. 焊枪摆动系统在焊接中的应用

    Application of torch swing system to the welding

  11. 宾采尔焊枪的最新研究成果

    Latest achievements in research of BINZEL torches

  12. 特征谐波法在焊枪姿态检测中的应用

    Application of Characteristic Harmonic Method in Welding Torch Attitude Identification.

  13. 弧焊机器人马鞍形工件焊枪姿态规划研究

    Study on Torch Pose Planning of Arc Welding Robot for Saddleshape Workpiece

  14. 图象处理后计算焊枪和焊缝之间的偏差。

    The deviatio n between torch and seam is calculated after image processing.

  15. 一个焊枪和乙炔气和氧气供应示意图示意图见图6。

    A schematic sketch of a welding torch and its gas supply is shown in Figure 6. 2.

  16. 钛合金钨极氩弧焊枪的保护性能试验研究

    A Research on the Behaviours of the Gas Shielding Torch in TIG Welding of Titanium Alloys.

  17. 使用从库存就在屋子中间的锁链棺材焊枪。

    Use the WELDING TORCH from inventory on the chains on the casket in the middle of the room.

  18. 步进式电弧螺柱焊枪及控制系统得研究。

    Study on Stepper Motor Arc Stud Welding Gun and Control System.

  19. 步进式电弧螺柱焊枪及控制系统的研究。

    Study on Stepper Motor Arc Stud Welding Gun and Control System.

  20. 接头间隙及焊枪位置编差视觉检测系统研究

    Study on vision measurement system for gap of welding joint and torch position

  21. 请绝不要把焊枪放到您得焊接工件之上。

    Never lay your tig torch on your workpiece again!

  22. 请绝不要把焊枪放到您的焊接工件之上。

    Never lay your tig torch on your workpiece again!

  23. 带故障的气压表，降压器，反闪捕集器和焊枪。

    Faulty gas pressure gauges, pressure reducers, flash back arresters and torches.

  24. 很好的焊接技能，熟练掌握电烙铁和热风吹焊枪的使用。

    Good welding ability. Experience in welding iron and air gun.

  25. 首先研究利用伺服焊枪在线提取压痕深度得可行性。

    The feasibility of indentation depth measured by servo gun online was studied.

  26. 首先研究利用伺服焊枪在线提取压痕深度的可行性。

    The feasibility of indentation depth measured by servo gun online was studied.

  27. 挡风玻璃上的闪光犹如电焊枪一样刻蚀你的双眼。

    The glare on the windshields etches your eyes like a welding torch.

  28. 水下焊接高速旋转电弧传感器及焊枪偏差识别的研究

    Study on Underwater Welding High Speed Rotational Arc Sensor and Torch Offset Identification

  29. 主要论述使用伺服焊枪来实现点焊质量在线检测的功能。

    This paper mainly relates the line inspection for spot welding using servo gun.

  30. 输送车的移动可使焊接机的焊枪口对准剪切口进行焊接。

    The motion of the transport car can drive a welding gun of the welding machine to align a shearing port to carry out welding.

词语焊枪相关网络短语词组

  1. 问：焊枪拼音怎么拼？焊枪的读音是什么？焊枪翻译成英文是什么？

    答：焊枪的读音是hànqiāng，焊枪翻译成英文是 welding torch; welding blowpipe; welding gun...

  2. 问：焊枪管拼音怎么拼？焊枪管的读音是什么？焊枪管翻译成英文是什么？

    答：焊枪管的读音是hàn qiāng guǎn，焊枪管翻译成英文是 torch head

词语焊枪百科解释：

焊枪

焊枪是指焊接过程中，执行焊接操作的部分，它使用灵活，方便快捷，工艺简单。

 

词语热门查询

 

辞洋在线查询工具：

音序检字法部首检字法笔画检字法汉字的笔顺

和焊枪相关的词语：

焊枪
 

微信扫码查看“焊枪”的解释

辞洋 - 辞海网络版字典