词语:轴承,语音朗读:热度:725

词语轴承拆分为汉字:

轴字的拼音、笔画、偏旁部首、笔顺、繁体字,轴字字源来历,轴字演变

1. 轴 [zhóu]2. 轴 [zhòu]轴 [zhóu]穿在轮子中间的圆柱形物件:~心。轮~。像车轴的用来卷绕东西的圆柱形器物:画~。卷~。量词,古代用于以轴装成的书卷,现用于缠在轴上的线以及装裱带轴子的字画等:“邺侯家多书,插架三万~……

承字的拼音、笔画、偏旁部首、笔顺、繁体字,承字字源来历,承字演变

在下面接受,托着:~重。~受。担当,应允:~担。~当。~包。~做。~认。受到,蒙受:~蒙。~恩(蒙受恩泽)。继续,接连:继~。~平(指社会比较持久安定的局面)。~前启后。顺从,迎合:奉~。~颜候色(顺着别人颜色办事)。姓。……

 

查询词语:轴承

汉语拼音:zhóu chéng

 

词语轴承基本解释

机械中一种常用的部件。用于支持轴旋转并保持其准确的位置,减少旋转摩擦。有滑动轴承和滚动轴承两大类。

 

词语轴承详细解释

  1. 支承轴的机件。轴可以在轴承上旋转,分为滑动轴承和滚动轴承等几种。

 

词语轴承双语例句

双语例句
  1. One of these is "service life" , which represents the actual life of a bearing in real operating conditions before it fails.

    其中一种是“使用寿命”,表示轴承在实际运行条件下出现失效前的实际寿命。

  2. The truck pivot bearing housing plate bolts to the side channels to allow easy removal of a truck without any other loco dismantling.

    卡车枢轴轴承箱板螺栓的一方渠道,让没有任何其他拆除洛科的卡车容易清除。

  3. The SKF Interactive Engineering Catalogue (IEC) is an easy-to-use tool for bearing selection and calculation.

    《交互式工程型录》(IEC)是一个容易使用的工具,供计算和选择轴承用。

  4. Active Magnetic Bearings (AMB) have such a lot of advantages that it is called a technology revolution in the bearings.

    磁悬浮轴承由于具有一系列独特的性能,被称为是支承技术的一场革命。

  5. It seemed as if the experiments could have lasted indefinitely if the bearing had not failed.

    若轴承不发生故障,试验可一直进行下去。

  6. Measurement of graphite sleeve bearings and the diameter of the shaft and see that they meet the surface finish.

    测量石墨轴承的孔径和轴套的轴径,并察看它们配合面的光洁度。

  7. When such a bearing failure occurs, the cost of the replacement bearing itself is small in relation to the cost of the plant downtime.

    当这种轴承故障发生的费用,更换轴承本身就是小有关的费用厂停机。

  8. Assessment results of the whole life time of a bearing by accelerated life test validate the feasibility and effectiveness of this method.

    通过对轴承加速疲劳寿命试验中全寿命周期的评估,验证了所提出方法的可行性和有效性。

  9. The results show that the main bearings can still be in a state of fluid lubrication when the journal misalignment angles are small.

    结果表明,轴颈不对中倾斜角度较小时,主轴承仍能够处于流体润滑状态;

词语轴承百科解释:

轴承

轴承(“Bearing”,日本人称“轴受”)是在机械传动过程中起固定和减小载荷摩擦系数的部件。也可以说,当其它机件在轴上彼此产生相对运动时,用来降低动力传递过程中的摩擦系数和保持轴中心位置固定的机件。轴承是当代机械设备中一种举足轻重的零部件。它的主要功能是支撑机械旋转体,用以降低设备在传动过程中的机械载荷摩擦系数。按运动元件摩擦性质的不同,轴承可分为滚动轴承和滑动轴承两类。

 
辞洋 - 辞海网络版字典